Sewing With Kids - Yes It Can Be Fun!

Several months ago, feeling very brave, I invited all 3 granddaughters to my sewing room. I needed a project that could be sewn fast and would capture and hold their attention.

The pull-on skirt in Martha Pullen's Sew Kool 4 Kids was chosen for the pattern. Hannah and Maleah wanted red skirts and Ashleigh wanted a blue one. We used Featherwale Corduroy, but any medium weight fabric would have worked.

All three of them wanted to decorate their skirts with machine embroidery and decided on a butterfly design. For the younger girls we used a butterfly design from Martha's Mini Collection. Ashleigh wanted a larger butterfly and chose the one from Dainty Designs.

The machine embroidery turned out great. It was very easy using the Floriana Wet and Gone Tacky. With this particular stabilizer, you do not hoop the fabric. Instead of hooping the fabric, you hoop the stabilizer and place the fabric on the sticky stabilizer. Very easy!

Because I didn't want the embroidery stitches to sink down into the corduroy fabric, we placed a water soluble stabilizer on top of it before stitching. The girls were absolutely fascinated with the embroidery machine!

That was Hannah's first time at seeing a piece of flat fabric turn into a cute skirt that she could wear! At only 4 years old, she loves clothes.

Managing Children in Your Sewing Room

The secret to managing energetic kids in your sewing room is to "de-energize" them! Earlier in the day, I sent Ashleigh and Maleah over to my son's (Hannah's daddy) house where there are acres and acres for them to run and jump and play to their heart's content!

When they returned, along with Hannah, they were more than ready to sit still and relax in the sewing room!

In the following video, you can watch them de-energizing before our sewing session.

Have a great weekend!

Heirloom Sewing Tip - Lace to Lace

This tip may be particularly helpful to beginners, especially if you are nervous about machine sewing, lace to lace.

I've often recommended using a little piece of tissue as a stabilizer at the beginning of the seam to prevent the lace from being pulled down into the sewing machine feeddogs. That's works fine until you sew past the tissue.

After you get past the tissue, it can get tricky keeping the lace headings butted together and preventing them from overlapping at times. Or trying not to stretch either piece of lace.

With a little practice, you can get the hang of it and will soon be joining lace together like a pro. But what if you don't have time to practice? What if you will be joining yards of lace to lace for a fancy band and need to do it right, the first time, without any mistakes?

Here's a little trick for perfect lace to lace heirloom sewing......

First, get a roll of Floriani Wet-n-Gone Tacky water soluble stabilizer. Yes, I know it is made for machine embroidery, but that's ok, we're going to use it for heirloom sewing anyway. (It comes in a big 10 yd roll that will last you forever, if using it for regular sewing)

Next, cut some strips of the Floriani Wet-n-Gone Tacky. Cut the strips wide enough to accommodate the width of the two pieces of lace that you will be sewing together. (i.e. if you are joining two 1/2 inch wide lace insertion pieces, cut the stabilizer a little over 1 inch wide.) If you have a rotary mat and cutter this part will be a breeze.

Now, peel off the paper backing from a stabilizer strip and neatly place the two pieces of lace on the sticky side of the stabilizer. Make sure the lace is straight, without gaps and not overlapping. Repeat this as many times as needed, depending on the length of the lace that is to be joined.

Next, set your zigzag stitch on your machine and sew away! When you're finished sewing, rinse the lace in water and the Floriani Wet-n-Gone Tacky rinses out completely.

Here's a photo of some lace I joined using this technique. It was fast and easy!